Guide 1 ... Sliding Door Bedroom Furniture
Fitted "sliders" are generally produced as a basic frame with no backing panel - the interiors are then made as carcase furniture and placed in situ behind the sliding doors .. note! there is normally a 50mm gap between the doors and the interior sections to prevent clothes "dragging" when the doors are opened, and fingers getting trapped!
If the doors are "custom made" the frame will be fitted floor to ceiling and wall to wall, alleviating the need for scribing panels - if not then you will have to accept standard door widths which are likely to overlap themselves by more than the standard - this will restrict access to the interior of the wardrobe.
| Guide 1 Index | Carcase | Frame | Sliding | Conclusion |